Oh, contain yourself! My garden plan for this year consists of three 4×4′ raised bed containers, which means I needed to build two more boxes. Here’s my simple “how to” for building raised garden beds.
Supply List (for each 4×4′ box)
2×6 boards* – 40 feet total (if you have to load them in your car you’ll want five 8-foot pieces, or you could cut them in the store)
4×4 post* – 6 or 8 feet long
48 3-inch or 3.5-inch nails (or screws)
* Most people recommend using cedar or redwood but I happened to have a bunch of lumber sitting around so I used plain old 2×6s – probably fir. True, they won’t last as long and they’re already a little beat up, but free is a pretty good price! Any wood will work as long as it’s not treated.
Power saw (I used a circular saw, but a table saw would be ideal)
- Get out your tape measure and mark cut lines every 48 inches on your 2×6 boards. I recommend leaving about 1/16″ for the cut or measuring after each cut.
- Power saw time – make the cuts so you end up with 10 pieces that are 48 inches long.
- Measure and cut your 4×4 post so you end up with four 16-inch pieces.
- Set two of the posts parallel on the ground, four feet apart and lay two of the 2×6 boards across them, even with the top.
- Nail two nails into the end of each board. Repeat with the second set of posts and two more 2×6s.
- Turn your new contraptions upside-down and position them parallel on the ground, four feet apart. Place one of your remaining 2×6s between them and nail it in place. Repeat with another 2×6 and then with the other side.
- Grab a friend and flip your box over!
- Nail the last two 2×6s to the top of your box to be used as benches or “knee rests.” I think it gives it a nice, finished look without spending time making precise diagonal cuts for an “all the way around” border.
- Dig four holes in the ground for the corner posts.
- Position your box and make sure it is level before filling in the holes.
Now all you need to do is fill your new container garden with dirt and get planting!
What to do when it’s raining and you can’t garden? Find cute botanical prints for a project! After several years of sharing my mornings with the group of neighborhood children and parents who stand in my front yard waiting for the school bus, I’ve decided I need curtains. (The greater issue of how to get them off my lawn will be solved at another time.) There are two 40-inch wide windows above my corner sink that face the street. Love the setup, but not the view.
I’ve seen a bundle of cute bright and LARGE botanical prints recently. It’s a fresh take on “old lady” botanicals.
My first wish was the Serafina shade from Pottery Barn (before I saw the $100 price tag). Too much for something I might ruin with a wild dish washing session. It’s also a little too red for my kitchen.
Then there’s the new Cecilia fabric line from IKEA I’ve been gawking at. There are several different patterns – all involving flowers, nuts or birds. My favorite is the Cecilia pink and orange print.
While not quite the bright look I’m going for, there’s something I initially liked about this large print Damask panel curtain from Target. It seems too trendy though… and after looking at it for a few seconds I decided it reminded me of some note cards I had a few years ago. A true sign the Damask trend is on it’s way out.
Back to the curtains. I purchased the Cecilia fabric and decided to create a simple cafe curtain for the perfect combination of privacy and light. I said “No thanks” to Martha Stewart’s detail-less post on creating a simple cafe curtain, and went my own route. It wasn’t too difficult to measure and sketch out a pattern idea. After sewing a set of curtains for each window, I realized the kitchen door looked lonely and made a matching set for the window.
I love the way they turned out. Perfect for spring and so easy I’ll be able to replicate them when I get tired of the print or find a new fabric I want to try.